ABOUT US   PRODUCTS    EMPLOYMENT   SALES   CONTACT

 

Products

.

"All antennas now with polyester powder coat finish! Custom colors available".
Model 6000
Frequency Range: 2-8 GHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 2.5 dBi nominal
Impedance: 50 Ohms
VSWR: 1.7:1 max
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type “N” female, stainless steel
Construction Material Aluminum and brass
Finish: White polyester powder coat
Overall Diameter: 3.25 inches
Mast Diameter: 1.75 inches
Height: 6 inches (minus extension mast)
Weight: Approx. 1lb
Uses: Point-to-point microwave radio,
Wireless video surveilance
WLL 4.9 GHz public safety Telemetry
Options: Supplied with extension mask
Magnetic mount available.
Model 5001
Frequency Range: 220-1200 MHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi nominal
Impedance: 50 Ohms
VSWR: 1.8:1 maximum
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type “N” female, stainless steel
Construction Material: Aluminum
Standard Finish: White polyester powder coat
Overall Diameter: 18 inches
Mast Diameter: 1.25 inches
Height: 14.40 inches
Weight: Approximately 9 lbs
Uses: Civil telecommunications, Military air-to-ground
   
MODEL 5002 VHF/UHF Discone Antenna
Frequency: 100-1200 MHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi Nominal
Impedance: 50 ohm
VSWR: 1.8:1 MAX
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type "N" Female, stainless steel
Construction Material: Aluminum
Finish: White polyester powder coat
Overall Diameter: 39 inches
Mast Diameter: 1.25" O.D.
Height: 50 inches
Weight: Approx. 15 lbs.
Uses: Civil & military air-to-ground
 
MODEL 5007 Discone Antenna

"Shown with Interad Model MK1 ship-/vehicle-deck mounting socket"
Frequency Range: 90-1200 MHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi nominal
Impedance: 50 ohm
VSWR: 2:1 maximum
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type “N” female, stainless steel
Construction Materials: Aluminum & brass
Finish: Gray polyester powder coat
Overall Diameter: 39 inches
Mast Diameter: 1.25 inches
Height: 59.50 inches
Dimensions: Height: 59.5" Diameter: 39"
Weight: Approx. 9 lbs.
Uses: Military air-to-ground (ruggedized for shipboar duse)
   
MODEL 5009 VHF/UHF Discone Antenna

"Shown with Interad Model MK1 ship-/vehicle-deck mounting socket"
Frequency: 100 -3000 MHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi Nominal
Impedance: 50 ohm
VSWR: 2:1 Maximum
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type "N" Female, Stainless Steel
Construction Material: Aluminum/Stainless Steel
Finish: Gray polyester powder coat
Overall Diameter: 39 inches
Mast Diameter: 1.25 inches
Height: 59.50 inches
Weight: Approximately 20 lbs.
Uses: Civil & military air-to-ground, PCS & cellular
   
MODEL 5017B
Frequency Range: 30-1900 MHz
Pattern:  Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi nominal
Impedance: 50 Ohms
VSWR: 2:1 maximum
Power Handling: 500 Watts CW
Wind Resistance: 50 MPH
RF Connector: Type “N” female, stainless steel
Construction Materials: Aluminum & brass
Finish: White polyester powder coat
Overall Diameter: 96 inches
Mast Diameter: 2.25 inches
Height: 144 inches
Weight: Approximately 40 lbs
Uses: Ground point-to-point, Civil & military air-to-ground, PCS & cellular
   
MODEL 5097A Antenna Ideal for all cellular & PCS bands 
Frequency Range: 800-3000 MHz
Pattern: Omnidirectional
Polarization: Vertical
Gain: 1.8 dBi nominal
Impedance: 50 ohm
VSWR: 1.8:1 maximum
Power Handling: 500 Watts CW
Wind Resistance: 80 MPH
RF Connector: Type “N” female, stainless steel
Construction Materials: Aluminum & brass
Finish: White polyester powder coat
Overall Diameter: 6 inches
Mast Diameter: 1.25 inches
Height: 10.50 inches
Weight: Approximately 2 lbs
Dimensions: Height: 10.5"
Uses: PCS & cellular
   
MODEL TASU-0145 Triple 9-Way Antenna Switch Unit 
Frequency Range: 1.5 - 50 MHz minimum
RF Inputs: 9
RF Output: 1 thru commutation
Impedance: 50 Ohms
RF Level: +20 dBm maximum
VSWR: 2.0:1 maximum
Blanking: 60 dB minimum. During blanking all antennas, as well as the commuted output, are terminated in 50 Ohms.
IP 3 Out: +34 dBm minimum
IP 2 Out: +65 dBm minimum
Weight: 24 lbs.
   
 
Model 3100 Modular HF Receiver System .
Click for Data Sheet		 Click here for details


Sets New Performance Standards With:
- Phase Coherence
- No Local Oscillators
- High Dynamic Range
- 400 Mbps Firewire Output Connection.
   
MODEL 9640 Dual HF Receiver
Frequency Range: 0.56 MHz to 32 MHz. For coverage below 2.0 MHz the receiver provides a straight-through RF path for the 0.56 to 4.56 MHz frequency range.  
Final Baseband IF Center: Bandwidth of 4.0 MHz centered at 2.56 MHz  
Frequency and Bandwidth Spectral Alignment: Non-inverting  
Synthesizer Control: The synthesizer is tuned using an RS-232C interface  
RF Gain Control: Each RF converter includes an input RF and final IF attenuator.The RF attenuators provide a minimum of 30 dB attenuation range in 2 dB steps and the IF attenuators provide a 20 dB minimum range in 2 dB steps.  
Baseband Output 2nd Order IP: +90 dBm minimum  
Baseband Output 3rd Order IP: +45 dBm minimum  
   
MODEL 9644 Frequency-Synthesized
Wideband HF Receiver

Available as dual-channel or single-channel receiver
Dual version configurable as 2 independent or 2 coherent recievers
Single version available with digitized output clocked from 80 MHz external source

Synthesizer with 100 microsecond max tuning speed enables tuning 1.0 MHz in 0.5 MHz steps

Unit is easily controlled via RS-232 interface

To download a spec sheet for Model 9644 click here or PDF icon.
   
Model 9776-10 VHF/UHF High Performance Receiver/Translator
A smaller, single-channel version is available.
To download a spec sheet for Model 9776-10 click here or PDF icon.
Configuration: 1 to 8 RF Translators 
Frequency Range: Tunable 20-2120 MHz
VSWR: 2.5:1 maximum into 50 ohms
Bandwidth IF BW: 2 dB bandwidth of 10 MHz centered at 6.5 MHz
SFDR: 80dB
Tuning: In less than 50 microseconds
Output Amplitude level Matches high performance ADCs
Output Amplitude level Clamped to prevent damage to ADC
   

Model 9776-25 VHF/UHF High Performance Receiver/Translator
A smaller, single-channel version is available.
To download a spec sheet for Model 9776 click here or PDF icon.
Configuration: 1 to 8 RF Translators 
Frequency Range: Tunable 25-2120 MHz
VSWR: 2.5:1 maximum into 50 ohms
Bandwidth IF BW: 25 MHz centered at 17 MHz
SFDR: 80 dB
Tuning: In less than 50 microseconds
Output Amplitude level Matches high performance ADCs
Output Amplitude level Clamped to prevent damage to ADC
 
MODEL 9776-S (D/E) Single Channel Receiver
Range: 25 - 2120 MHz
Bandwidth IF BW: 10 MHz centered at 6.5 MHz
Spectral Alignment: Non-inverting
Baseband Output 2nd Order IP: +90 dBm minimum
Baseband Output 3rd Order IP: +45 dBm minimum
RF Gain Control: RF attenuator - 30 dB in 2 dB steps
  Control Interfaces: RS-232C
 
VLF- 2055 Receiver Upconverter
Input Frequency Range: 10 KHz-1.6 MHz (2 dB bandwidth)
Output Frequency Range: Upconverted to an A/D input range of 5.01-6.6 MHz
Output Level: +4 dB nominal
Gain: 40 dB
Size: 6u x 160 mm double slot VME
RF Gain Control: RF Attenuation -- 45 dB in 3 dB steps
Three Selectable Band Suppression Filters: Nominal 3 dB bandwidths of 148.5-255 KHz, 255-283.5 KHz, 525 KHz low pass, minimum null of 20 dBm
 
V/UUC-2021 Single Channel Upconverter
Input Frequency Range: 1.5 MHz to 11.5 MHz baseband
Output Frequency Range: 20 MHz to 2120 MHz (tunable in 1 MHz steps)
Gain: 48 dB
Gain Control: 45 dB
External Control: RS-232
 
MODEL MCFU-2101Multichannel Notch Filter Unit .
Click for Data Sheet
Eight Matched Notch Filter Channels
Four Fixed and Four Tunable Filters Per Channel
1 MHz to 12 MHz frequency range
20 dB minimum rejection, 30 dB typical
-80 dB interchannel crosstalk.
 
PLO-2002 Phase-Locked Oscillator

Model PLO-2002

Designed to support fast A/D clocking

Excellent phase noise & dynamic range

Standard 10 MHz reference, with front panel lock detector indicator
To download a spec sheet for Model PLO-2002 click here or PDF icon.